Resetter Epson L3110
A free waste-ink-pad counter reset tool for the Epson EcoTank L3110 — one of the most widely used printers in the world, valued for its energy efficiency, low ink consumption, and consistently high performance.
- Developer
- Seiko Epson
- OS support
- Windows 7, 8, 10, 11
- License
- Freeware
- Size
- 4 MB
Download Resetter Epson L3110
Features of Epson L3110
High speed
The Epson L3110 prints up to 33 pages per minute (ppm) in black and white and 15 ppm in color. Photo efficiency is rated at about 10 images per minute (ipm) for black and 5.0 ipm for color. Draft print speed is roughly 69 seconds for bordered photos and 90 seconds for borderless photos, with the first page printing in about 10 seconds (black) or 16 seconds (color).
Copy speed is around 7.0 ipm for black and 1.7 ipm for color, while scan speed averages 11 seconds for monochrome documents and 32 seconds for color scans.
Low energy consumption
The Epson L3110 draws roughly 12 watts during standalone copying. Full breakdown below:
- Standalone copying~12 W
- Ready mode~3.9 W
- Sleep mode~0.4 W
- Power off mode~0.2 W
- Rated current0.4 – 0.2 A
- Supply voltageAC 100V – 240V
Maximum resolution
The maximum print resolution of the Epson EcoTank L3110 is 5760 × 1440 dpi.
- Maximum print resolution5760 × 1440 dpi
- Optical scan resolution600 × 1200 dpi
- Maximum copy resolution300 × 300 dpi
Price
The Epson L3110 printer in Indonesia typically costs between Rp1,300,000 and Rp2,700,000, depending on whether you buy a used/secondhand unit or a new/remaining-stock unit with an official warranty.
No ink issues
The Epson L3110 has a built-in ink detection and error-fixing system. If it detects an ink-system error, printing stops and an error is shown. Fix the ink error first, and the printer will resume working automatically.
Low budget
The Epson L3110 costs far less than many market printers that offer high prices but low performance. If you’re working with a tight budget, it’s one of the best choices you can make.
High performance
A reliable, budget-friendly 3-in-1 multifunction printer (print, scan, copy) that delivers high-resolution printing at an ultra-low cost per page.
High performance, in detail
The Epson EcoTank L3110 is a reliable, budget-friendly 3-in-1 multifunction printer (print, scan, copy) that delivers high-resolution printing at an ultra-low cost per page.
Print speed and quality
- Print resolution: up to 5760 × 1440 dpi using Variable-Sized Droplet Technology for sharp text and vibrant images.
- Print speed: ISO speeds up to 10 ipm for black and 5.0 ipm for color, with draft speeds up to 33 ppm black and 15 ppm color.
- Photo printing: supports borderless photo printing up to 4R (4″ × 6″) size.
Ink efficiency and economy
- High yield: a single set of genuine replacement ink bottles yields up to 4,500 pages in black and 7,500 pages in color.
- Spill-free design: an integrated, front-facing ink tank system with keyed bottles for clean, error-free refilling.
- User consensus: users in online communities generally agree the L3110 offers exceptional economy and performance, making it popular for photo printing, custom stickers, and everyday documents.
Scanning and copying
- Scanner resolution: flatbed optical scanner rated at 600 × 1200 dpi.
- Copy function: handles standalone copying efficiently with zoom from 25% to 400%.
Limitations
- Connectivity: no built-in Wi-Fi or wireless capability — relies on a wired USB 2.0 connection.
- Duplexing: no automatic two-sided (duplex) printing.
EcoTank technology
The EcoTank L3110 uses cartridge-free ink tank technology designed to lower printing costs and reduce waste.
Integrated front-facing tanks
The ink tanks sit built into the front of the printer, making it easy to check ink levels at a glance.
Spill-free refilling
Each color uses unique, keyed ink bottles that only fit their matching tank, preventing mistakes and messy spills.
Ultra-high page yield
A single set of replacement ink bottles prints up to 4,500 pages in black and white and 7,500 pages in color.
Massive cost savings
Cartridge-free printing cuts ink costs by up to 90%, replacing the need for traditional, expensive ink cartridges.
Micro Piezo printhead
The system relies on Epson’s precision inkjet technology to support a high resolution of up to 5760 × 1440 dpi.
Save documents
You can scan and save documents to your computer using the Epson Scan 2 software, or by downloading tools like Epson Print and Scan, at a maximum resolution of 19200 dpi. Scans can be saved in several formats, including JPEG, TIFF, PDF, and BMP.
Steps to scan and save documents
- Place your document face-down on the scanner glass of your Epson L3110.
- Open the Epson Scan 2 app on your computer.
- Select your Epson L3110 from the scanner list.
- Choose your settings — document source: Flatbed; image type: Color or Grayscale; resolution: 300 dpi (best for normal documents).
- Once finished, the file saves automatically to your chosen destination folder (usually the default Documents folder if not changed).
How to reset the Epson L3110 printer
Follow these steps in order to clear the waste ink pad counter.
Check for the warning sign
If you see the warning sign in the software, as shown in the screenshot below, the printer needs to be reset.
Open the resetter and select adjustment mode
After downloading the Epson L3110 Resetter from driverepsonl3210.com, open the software and click on Particular Adjustment Mode.
Select the Waste Ink Pad Counter
In the Maintenance section, select Waste Ink Pad Counter.
Check the Main Pad Counter
Tick the “Main Pad Counter” checkbox, then click the “Check” button.
Review the printed page count
You’ll see the number of pages printed so far. If it shows 100%, a reset is needed — click Check to review the printer’s details.
Initialize the counter
Click the Initialize button and wait a few seconds.
Power-cycle the printer
Turn the printer off, then click the OK button.
Confirm the reset
Wait a few minutes until a notification banner confirms the printer has been reset successfully. It will then work normally again.
Most common errors and solutions while resetting Epson L3110
The most common error during an Epson L3110 reset is the “Waste Ink Pad At The End Of Its Service Life” warning, usually fixed using the Epson Adjustment Program or a similar reset utility.
Antivirus blocking the resetter tool
Cause — Windows Defender or third-party antivirus flags the adjustment program or key generator as a trojan or malicious tool.
Fix — Turn off your antivirus protection temporarily before downloading, extracting, and running the reset software.
Printer not communicating (communication error)
Cause — the adjustment program cannot detect the printer via the USB port, or multiple printers are connected.
Fix — disconnect extra printers, plug the USB cable directly into a rear USB port on your PC, and manually select the correct L3110 port in the software settings.
Trial limit or license key errors
Cause — trial versions only clear a percentage of the counter, or custom key generators fail due to incorrect computer/hardware ID matching.
Fix — copy the exact hardware/computer ID shown by the program when generating a key, or use a fully compatible Adjustment Program version for the L3110.
Red lights still blinking after reset
Cause — the printer wasn’t restarted properly, or pending print jobs are stuck in the Windows queue.
Fix — turn off the printer using the physical power button, wait 10 seconds, then turn it back on. Clear all pending print tasks from your computer.
Pros and cons of the Epson L3110
Pros
- Ultra-low printing cost — high-yield ink bottles offer thousands of pages at a fraction of the cost of cartridge printers.
- High page yield — up to 4,500 black-and-white pages and 7,500 color pages per ink set.
- Spill-free refilling with individual, keyed ink bottles for error-free tank refilling.
- High print resolution — up to 5,760 dpi for sharp text and clear photo prints.
- Compact design with minimal desk footprint thanks to its integrated tank system.
Cons
- No Wi-Fi or Bluetooth — connects only via a physical USB cable.
- No automatic duplexing — double-sided printing requires manually flipping pages.
- Slower during large, continuous bulk print jobs.
- Prone to nozzle clogs, streaks, or paper jams if left unused for long periods.
Conclusion
The Epson L3110 has earned its reputation as one of the most reliable EcoTank printers around — low running costs, sharp print quality, and the kind of everyday dependability that makes it a favorite for homes, small offices, and photo enthusiasts alike. The one hiccup every long-term user eventually meets is the waste ink pad counter reaching its limit, and that’s exactly what the Resetter Epson L3110 tool on this page is built to fix. Download it, follow the eight-step guide above, and your printer should be back to full health in a matter of minutes — no technician visit and no extra spending required. If anything doesn’t go as expected, the troubleshooting section and FAQs below cover the issues people run into most.
FAQs
How do I refill the ink tanks?
Open the ink tank cover, remove the cap for the specific color, and insert the matching genuine Epson ink bottle straight into the filling port. Stop refilling when the ink reaches the upper line, and never let the ink drop below the lower line — this can damage the printer.
How do I fix faded or streaky print quality?
Run a nozzle check and perform a print head cleaning through your computer’s printer utility software to clear clogged ink nozzles.
What does an “end of service life” ink pad error mean?
It means the internal waste ink pad is full and needs resetting or replacement. You can reset the waste ink pad counter using an official adjustment program or reset utility.
How do I start initial ink charging?
After filling the tanks for the first time, press and hold the stop button on the printer for about 5 seconds until the power light flashes and ink charging begins — this takes roughly 10 minutes.
What paper sizes are supported?
The printer supports various sizes, including A4, A6, Letter, Legal, and custom sizes up to 8.5 × 47.2 inches.
Is resetting the printer enough?
Yes — once the printer has been reset properly, you can use it again, because the limit is removed and the printer will work normally.
How much does the Epson L3110 printer cost?
In Indonesia, it typically costs between Rp1,300,000 and Rp2,700,000, depending on whether you buy a used/secondhand unit or a new/remaining-stock unit with an official warranty.
Can the Epson L3110 printer use Wi-Fi?
No, the Epson L3110 does not have a Wi-Fi feature — it connects only via USB. If you want a wireless printer, consider models like the L5190 or L3150.
What year was the Epson L3110 printer released?
The Epson L3110 was introduced in 2018 as part of Epson’s EcoTank series, known for its refillable ink system, cost-effectiveness, low energy consumption, high performance, and EcoTank feature.
Can the Epson L3110 printer scan documents?
Yes — you can scan different documents using the Epson L3110 printer and use them later.
What is the print resolution of the Epson L3110?
Up to 5760 × 1440 dpi using Variable-Sized Droplet Technology for sharp text and vibrant images. Print speed reaches ISO speeds of up to 10 ipm for black and 5.0 ipm for color, with draft speeds up to 33 ppm black and 15 ppm color. Borderless photo printing is supported up to 4R (4″ × 6″) size.
How much does Epson L3110 printer ink cost?
Genuine Epson L3110 ink costs between Rp150,000 and Rp250,000. For accurate pricing, check trusted e-commerce sites and compare rates before buying.
What ink can the Epson L3110 use?
Black, cyan, magenta, and yellow.
How long is the warranty for the Epson L3110 printer?
The warranty period is 2 years.